Ok, here's another of my cheap-outs. It was easy to assemble and the included
3/8" blade runs right down the middle of the wheels. I added the 6" risker
kit ($49) so now I have a 12" resaw capacity. Again, after adding the riser
the new 105" blade still rides right down the middle of the wheels. I added
a set of Cool Blocks and extended the tension adjuster.
Cons: No dust port (I'm going to add one in the lower cover) and the tension adjustment
knob is too short causing you to bust your knuckles. I fixed this by replacing
the assembly with a 12" piece of threaded rod with a knob on the end.