| his is my Sharpening Station. I use it primarily for
my turning tools. Left to right we have my DIY Craftsman benchtop
belt/disk gouge sharpener, my Variable Speed (2000-3400rpm) 6" Delta
Grinder and my 8" Woodcraft 1750rpm grinder with Norton 80 and 120 grit
wheels. There is a T-Track installed into the bench along the front of
the grinders. This is so I can easily move my grinding accessories to
either grinder. Right now the left 80 grit wheel of the 8" grinder has
my
Veritas Grinding Jig w/tool rest and the right 120 grit wheel has
my Sorby
Universal Grinding jig installed. |
